Remote Site Monitoring Applications
with a Davicom MAC System
|
PATTERN CHANGE: AM Pattern changes using the MAC unit's built in timers |
|
|
TOWER LIGHTS: Turn on/off tower lights using built-in timers or programming the latitude and longitude of the site for local sunrise and sunset calculations or validate that tower lights are between sunset and sunrise |
|
|
PING: Ping an IP link with an external device such as a wireless router or any other device and automatically reset these devices |
 |
|
PING: Check phone line for dial-tone presence every 15 minutes |
 |
|
GENERATOR: Automatically starts a generator when the power is down without human intervention |
 |
|
GENERATOR: Automatically perform a generator test by using the MAC unit built in timers (preventive maintenance) |
|
TRANSMITTER: Start automatically a back-up transmitter when the main transmitter is down without human intervention |
 |
|
TRANSMITTER: Automatically start-up a remote back-up transmitter (requires IP access and 2 MAC units) |
|
MONITOR/CONTROL VARIOUS PARAMETERS: Allow remote monitoring of conditions at the site such as humidity, power, indoor and outdoor temperature, door entry, VSWR, and more |
 |
|
TWO-WAY RADIO: Time-out stuck mikes or repeater Push-To-Talk (PTT) through activity monitoring on status inputs |
 |
|
TWO-WAY RADIO: RS-232 reach-through ports to configure on-site equipment such as two-way radios, EAS systems, etc |
 |
|
INDOOR TEMPERATURE: Automatically starts a heater when indoor temperature goes below limits without human intervention |
 |
|
INDOOR TEMPERATURE: Automatically starts an air conditioning unit when indoor temperature goes above limits without human intervention |
 |
ANTENNA: Automatically turn on an antenna heating unit if the VSWR increases and the outside temperature is below freezing and the relative humidity is high (freezing rain) |
 |
