AES/EBU AUDIO DETECTOR SWITCHER
Product ordering code: DADS-01 NEW!
Davicom's AES/EBU Audio Detector Switcher (DADS-01) is designed to be used as an automatic or manual switch for AES/EBU digital audio signals. It offers all the necessary inputs and outputs to be controlled and monitored by other equipment such as the Davicom Monitoring and Control units or to be used as a standalone device.
The DADS-01 has sophisticated audio level detection algorithms that enable thresholds with delays to be programmed on each of its three input sources (2 digital, 1 analog).
The DADS-01 offers the following features:
-
Normal and Low Level threshold settings on all input sources (0-99 dBFS)
-
Normal and Low Level delay on all input channels (0-99s)
-
Manual or automatic operation
-
Rear panel monitoring and control I/Os
-
USB port for connection to a PC or a Davicom DV series
-
2 digital inputs, 1 analog input and 1 digital output
-
Test Tone -20 dBFS (1 kHz on Left Channel, 400 Hz on Right Channel)
|
DADS-01 SPECIFICATIONS |
|
Digital Audio Inputs |
Type |
Balanced |
| Input Impedance |
110 ohms |
| Connector |
XLR (F) |
|
Suggested mating connector for EMC compliance |
Neutrik #NC3MXCC |
|
Analog Audio Input |
Type |
Balanced or single-ended |
|
Input Impedance |
10 kohms or 600 ohms (internal onboard jumpers) |
|
Connector |
Pluggable screw terminal |
|
Supporting Sampling rates |
Automatic Detection |
16kHz, 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz |
|
Audio outputs |
Type |
Balanced |
|
Load impedance |
110 ohms |
|
Connector |
XLR (M) |
|
Level |
3 Vp-p in 110 ohms |
| Cable Type |
STP (Shielded Twisted Pair) |
| Suggested mating connector for EMC compliance |
Neutrik #NC3FXCC |
|
REAR Panel Outputs |
Level |
TTL |
|
Connector |
Pluggable screw terminal |
|
Output functions |
Source selected / Fault |
|
Source Switching |
Automatic or Manual |
Manual mode: selection from front panel button or rear panel connector |
|
USB interface |
Functions |
Allows remote control and continuous alarm monitoring through compatible Davicom MAC units |
|
Software remote control |
Through MAC Davicom |
Source selection (1, 2 or 3)
Normal / Low Level Limit
Normal / Low Level Delay
Manual / Auto Mode Selection |
|
Manual control |
Via front panel pushbuttons |
Same functions as via software remote control above |
|
Power Supply |
11 - 14 Vdc, 250mA @ 12V |
|
Dimensions |
1 RU, 8.5" x 1.5" x 12" half-rack unit (tray available) |
|
Weight |
1.0 kg (2.2 lbs) |
RoHS Compliant
