Product ordering code: RMSPS8 or RMSPS30
The RMSPS is a RMS RF Power Sensor designed to detect the power levels of complex RF waveforms such as DTV, CDMA and multiple transmitter signals combined onto a single antenna line for example. The power sensor is normally connected to an in-line directional coupler that allows signal sampling in both the forward and reflected directions.
The sensor comes in two versions. The Model RMSPS30 has a 30 dB RF attenuator at its input and is normally used for forward power measurements while the Model RMSPS8 has an 8 dB attenuator and is intended for reflected power measurements. Both sensors have a wide dynamic range and RF bandwidth.
These sensors are a perfect complement for the Davicom MAC units.
|
|
RMSPS8 |
RMSPS30 |
|
ELECTRICAL SPECIFICATIONS |
|
Frequency Range |
50 - 1000 MHz |
|
Dynamic Range |
27 dB |
18 dB |
|
RF Input Power (CW) |
+16 dBm |
+30 dBm |
|
Absolute Maximum RF Input |
+20 dBm |
+30 dBm |
|
Supply Voltage |
12 VDC |
|
Maximum Output Voltage |
4V@ +15dBm |
1.8V @ +30dBm |
|
Connectors |
RF input: "N" type female
Output & Supply Voltages: Screw terminals |
| Measurement Accuracy |
MAX ± 1dB
from -11 to +16dBm |
MAX ± 1dB
from +12 to +30dBm |
|
MECHANICAL SPECIFICATIONS |
|
Dimensions |
3 3/4 x 2 x 1 11/16 in (W x D x H)
9.5 x 5.1 x 4.3 cm |
|
Weight |
less than 9 oz
less than 250 g |
More info / Order product
