|
|
| |
 (see End of Sale notice)
The MiniMAC+ has been optimized for systems where the number of Inputs/Outputs is limited. It is the perfect choice for sites having only one transmitter.
INPUT/OUTPUT CONFIGURATION:
|
INPUTS |
OUTPUTS |
PORTS |
|
Metering
(analog) |
Status
(digital) |
Audio |
Relay /
Open Collector |
Serial (RS-232) |
|
8 |
16 |
2 |
8 |
1 |
CONNECTIVITY OPTIONS:
|
PRODUCT
suffix |
MAC HARDWARE |
SITE CONNECTION |
| -01 |
Internal dial-up modem
(with voice interface & DTMF control)
on RJ-11 connector |
- Landline telephone
- Analog mobile telephone (with RJ-11 connector) |
| -02 |
RS-232 serial port
(no voice interface, no DTMF control)
on DB9 connector |
- External serial modem (Hayes compatible)
- Satellite serial modem (Hayes compatible)
- GSM serial modem (Hayes compatible)
- RF serial link |
| -0103 |
Internal dial-up modem
(with voice interface & DTMF control)
on RJ-11 connector,
and IP interface
on RJ-45 connector |
- Landline telephone
- Analog mobile telephone (with RJ-11 connector)
OR (no simultaneous access)
- Ethernet connection (Internet, WAN, LAN) |
| -0203 |
RS-232 serial port
(no voice interface, no DTMF control)
on DB9 connector,
and IP interface
on RJ-45 connector |
- External serial modem (Hayes compatible)
- Satellite serial modem (Hayes compatible)
- GSM serial modem (Hayes compatible)
OR (no simultaneous access)
- Ethernet connection (Internet, WAN, LAN) |
REAR VIEW OF A MiniMAC-0103:
Click to enlarge
-
RS-232 port to communicate with other on-site ancillary equipment;
-
Weidmuller screw terminals for the 8 metering inputs, 2 audio inputs for monitoring via telephone, 16 status inputs and 8 relay/open collector outputs;
-
Plug for an AC/DC converter that will monitor mains;
-
RJ-11 phone jack (can be replaced by a RS-232 port) for remote control / interrogation;
-
RJ-45 Ethernet jack (optional) for remote control / interrogation;
-
XLR4 connector for power supply;
-
Ground connection lug;
-
Chassis-mounted fuse.
FRONT PANEL DISPLAY:
-
RS-232 port to connect laptop in local control mode;
-
LEDs for DC power, minor and major alarms, communications, user on line and activity;
-
Buttons for local and pause modes.
| ELECTRICAL SPECIFICATIONS |
| System Configuration |
I/O card supports 8 metering inputs, 16 status inputs, 2 audio inputs,
8 relay / open collector outputs and 1 RS-232 port. |
| Metering (Analog) Inputs |
Resolution: 12 bits;
Unipolar;
3 ranges (automatically selected): 0 to +2.5, 0 to +10 and 0 to +40 VDC;
Impedance > 100 k§Ù. |
| Status (Digital) Inputs |
EIA compatible;
Opto isolated;
Impedance > 22 k§Ù;
Detection levels: -12 to +0.8 VDC (low)
+2.4 to +12 VDC (high). |
| Audio Inputs |
-20 to +10 dBm (300-3000 Hz);
Impedance 10 k§Ù. |
| Outputs (Commands) |
Selectable NO/NC dry contact relays (70 VAC @ 0.4 A, 30 VDC @ 2 A)
or open collector (50 mA). |
| Auxiliary DC Output |
5 VDC, 250 mA maximum. |
|
Serial Port for
Local Access |
9600 bps, DB9 female connector located on front panel. |
|
Serial Port for
On-Site Ancillary Equipment |
1200 to 19200 bps, DB9 male connector located on rear panel. |
|
Serial Port for
External Modem |
Available only with 02 connectivity option;
1200 to 19200 bps, DB9 male connector located on rear panel. |
| Internal Modem |
Available only with 01 connectivity option;
RJ-11 jack located on rear panel;
Voice/Fax/Data;
56 kbps or less;
Fax up to 9600 bps;
DTMF interface. |
| Alarm Reporting* |
Via e-mail, SMS, SNMP traps, voice interface, fax, pager (alphanumeric, voice or digital), VT-100 or optional MacNet software.
*Depends on the connectivity option of the MiniMAC. |
| Delay Before Action |
Programmable on each input, 0 to 9999 seconds. |
|
Delay Before
Return to Normal |
Programmable on each input, 0 to 9999 seconds. |
| Power Requirement |
12 VDC, 1 A |
| Fuse |
250 V, 3 A |
| Operating Temperature |
32 to 122 ¡ÆF
0 to 50 ¡ÆC |
| MECHANICAL SPECIFICATIONS |
| Dimensions |
1 RU
19 x 1 3/4 x 12 in (W x H x D)
48.3 x 4.4 x 30.5 cm |
| Weight |
9 lbs. dry; 10 lbs. shipping
4.1 kg dry; 4.5 kg shipping |
Each MiniMAC unit is shipped from the factory with the following:
- Firmware pre-loaded into the unit
- Installation CD including:
- MacComm Windows-based MAC communications, control and configuration software
- Utility programs (MAC configuration manager and MAC sensor curve fitting utility)
- Copy of the firmware
- User & service manuals
More info / Order product
|
|
|
|
